Stream+ (CM-7600)

Software version 7.0-1.3.1was released on Thursday April 19thand provides bug fixes and enhancements as listed below.......

There are two ways to see if your Remote Control needs a Firmware Update.  First method;  Press the Home button on y......

If you would like to scan for TV Antenna channels, follow the instructions below. Press the 'Home' button on your re......

To find out if your Stream+ is receiving a good/strong signal, follow the instructions below.  Press the Home button......

WPS is a WIFI protocol/Standard, available to easily connect the Stream+ to a WIFI Router without needing Pass Phrase......

If you want to check to see if there is another software version available for your Stream+, press the Home button on......

The Stream+ can activate the 'Screen Saver' if there has been inactivity for a pre-set amount of time. (Inactivity = ......

If for any reason you need to remove the SD Card from your Stream+, please do the following.  Press the Home button ......

First try removing the power from the Stream+ for a few seconds, then reapply power and allow the Stream+ to boot bac......

If you would like to take your Stream+ back to default factory settings, then please do the following. Leave your Spe......

Have you tried more than one storage device? External Hard Drive? Another SD card? If yes, then you'll need to do the......

If you miss a step in the initial setup process, you might not have the 2 day Antenna TV Electronic Program Guide pop......

If your symptom is, 'you have to point the remote control at the front of the STREAM+', then it is likely that the Bl......

If you are connecting your Stream+ to a Home Theater/AV Receiver with the HDMI cable, and you have issues, but, if yo......

 If your Stream+ shuts off, when you have not pressed the Power button on the remote, that means that the Inactivity ......

The Stream+ can activate the 'Screen Saver' if there has been inactivity for a pre-set amount of time. (Inactivity = ......

If you see this message, below, that means that the Stream+ is recording 2 programs. "This channel can't be play......

If you want to customize your Electronic Program Guide (EPG), please follow the instruction below.  While watching l......

For information about installing apps, please go to an Android help site or the app help site. e.g. https://support.g......

Press Home button on Stream+ remote. Navigate down to Settings and select it.  Navigate down to 'About' and select i......

If you want to test the Voice Command feature on the Stream+ please do the following.  Press the Home button on your......

If you are not sure that your Stream+ is connected to the Network and Internet, there are a couple of things you can ......

Press the DVR button on the remote. Navigate to the recorded program that you want to watch. If there are multiple r......

If you see a "No Signal" message on your screen, that is being generated by the TV/Display. (This FAQ is NO......

It is normal to see a blank black screen when you first turn on the power to your Stream+. That 'Boot Up' should last......

No, it is only for Antenna TV and Streaming.  Currently when going through the initial setup procedure, prior to the ......

Yes, you can connect other accessories, via Bluetooth.  For instance, you can connect a Bluetooth keyboard or game co......

  If you had programmed the Stream+ remote to control your TV, but have decided that you'd like to change that, pleas......