Cable/Antenna Receiver (CM7001)
ATSC/Clear QAM Digital Tuner
-
What is the CM7001 used for?
The Channel Master CM-7001 is used to tune ATSC (Antenna) or clear QAM (unencrypted cable) signals for televisions, ......
-
What type of signals can the CM7001 tune?
The CM7001 will tune standard ATSC digital signals off an antenna, and can also tune clear QAM signals, which are une......
-
Where can I find product documentation for the CM7001?
Product documentation for the CM7001 can be found here. https://support.channelmaster.com/hc/en-us/articles/200383375......
-
Does the CM-7001 go into a power saving mode or screen saver after a period of inactivity?
No, the CM-7001 will display the tuned channel without interruption....
-
Will the CM-7001 power itself back on after a power outage?
No, the CM-7001 will not automatically power on after a power outage, user intervention will be required to power the......
-
Why can I receive a channel directly off my antenna to my TV, but not through my CM7001?
The tuners in different devices will always have some variations in how well they receive different channels, based o......
-
What code do I need to program into my universal remote control so I can use it to operate the CM7001?
Each manufacturer of universal remote controls uses their own codes for each device that it is capable of operating. ......
-
Why doesn’t my CM7001 respond to the remote control?
Press the 0 button on the remote control and watch the HD/SD button on the remote. If the remote is functioning corr......
-
CM7001 Can I use the HDMI, Composite Video, Component Video, S-Video, and RF outputs all at the same time on different devices?
Yes, all of the video and RF outputs on the back of the CM7000PAL can be used at the same time, but every device they......
-
Why does my HDMI connection not seem to work all the time, or why is it intermittent?
HDMI is designed to make interconnecting video and audio components easy by using a single cable that carries both vi......
-
Can I watch analog NTSC signals on my CM7001?
No, the CM-7001 is designed to receive digital ATSC programs over the air and Clear QAM signals on a cable television......
-
Does Channel Master provide repair services for the CM7001 after it is out of warranty?
Channel Master doesn’t currently provide repair services for out of warranty products. Many TV repair shops are able......
-
What type of batteries does the CM7001 remote control use?
The CM-7001 remote control uses two 1.5V AAA batteries....
-
Can I independently control two CM7001 antenna tuners in the same entertainment center from the remote control that comes with the unit?
The remote control that comes with the CM-7001 cannot independently operate two different CM7001 antenna tuners that ......
-
Can I watch QAM Cable channels on my CM7001?
If you are connected to a cable television network, they will typically have analog NTSC, Clear QAM, and encrypted QA......
-
Why doesn’t my CM7001 pick up all my basic cable channels?
The CM7001 is designed to receive over the air ATSC channels, and Clear QAM channels. Cable television operators typ......
-
What is the specified input signal level for operation on the CM7001?
The The specified input signal level for the CM7001 is +11dBmV to -11dBmV. ...
-
What is the unit of measure of the quality meter in the CM7001's User Interface?
The quality meter represents SNR(signal to noise ratio, Bit Errors, etc.) You cannot equate a real life unit of measu......