How To Receive Only Broadcaster Provided(PSIP) Guide Information(NOT INTERNET GUIDE) (CM-7500)

Please make the following changes to the settings on your DVR+ and keep your internet connected.

  • Change your zip code setting to 00000.
    • On your remote control, press Menu>Settings>Time & Date>Zip Code(should be Orange). Press OK on the remote and the first digit of the zip code will turn orange.
    • Using the numbers on the remote control, enter the five 0's.
    • Navigate down to Time Zone & Press OK.
    • If Auto Time and Date has the yellow dot, then just press the exit button on your remote. 
      • If you won't be keeping the internet connected, then you will need to disable Auto Time & Date 
    • If Auto Time & Date does not have the yellow dot, and your internet is connected, navigate to Auto Time & Date and press OK>When the dot becomes yellow, press Exit button on your remote.
    • Go back to Time & Date 
      • Confirm time zone, date and time are correct. Then press the exit button.
  • You'll now be receiving the guide data from the your local broadcast stations. 
  • You'll no longer see network icons just to the left of the channel numbers. 
    • The icons will be replaced with a white outline of a TV.
  • Now use the channel up + button on your remote to go through each channel to trigger the guide data download. 
  • Going forward the guide data download, should be triggered automatically. 
  • If you are setting up a Series recording, and the guide shows Unknown Event, then you'll need to set it up as a manual recording.
Have more questions? Submit a request