Where can I find documentation for the SMARTenna+ (CM-3001HD CM3001HD)

You can find the Product Sheet here

You can find/watch an instructional User Guide Video by clicking on the image below.

Please note; This video states that the 'Optimization' process takes 2 to 3 minutes.  The optimization process (Blinking LED) actually averages up to 5 minutes to complete but could take longer, dependent upon the environment.

Please note; If you are trying to use this antenna with an older Analog TV, you'll need to use a 'Digital To Analog TV Signal Converter Box' "CM-7004".

There is 1 storage device that we currently recommend for the CM-7004.

"Sandisk Extreme 500 series. Model# SDSSDEXT-120G "We have tested a number of Solid State storage devices. The Sandisk Extreme 500, 120GB has consistently provided the best results.

*Enabling basic recording capability requires a USB drive (Flash or Solid State), minimum 16GB and maximum 128GB. IMPORTANT: The USB drive must be a new, first-time use device in order to be properly formatted for use with ConverterBox.

Please note; The CM-7004 has been designed as a Digital signal to Analog signal converter. Primarily the CM7004 is used to accommodate older Analog TV's that do not have an HD ATSC tuner, or a  Digital display that does not have an HD ATSC Tuner installed. 

Secondary to that, it will also record TV programs. This is an economy set top box and has limited Recording options.


CM-3001 CM3001 CM3001HD CM-3001HD 3001

Have more questions? Submit a request