Controlling the Volume for an Audio Device DVR+ Remote (CM-7500XRC2)

 Follow this procedure to program the volume + and – buttons on the remote to control your audio device’s volume instead of your TV’s volume.

Note : Before following this procedure, you must first program your remote to control your audio devices power on/off, as described on the previous pages in this section.

1. Press and hold the setup  button until the on/off button blinks twice, then release the button.

2. Press and release the vol+  button.

3. Press and release the green  button. The power button will blink twice to indicate it has changed the programming of the remote. 

NOTE: If you wish to revert volume control back to your TV, repeat this procedure and press the red button instead of the green button in step 3.

Have more questions? Submit a request