Follow this procedure to program the Volume (+ and –) buttons
on the remote to control your audio device’s volume instead of
your TV’s volume.
Note : Before following this procedure, you must first program
your remote to control your audio devices Power On/Off, as described on the
previous pages in this section.
1 Press and hold the SETUP button until the OFF/ON button
blinks twice, then release the button.
2 Press and release the VOL+ button.
3 Press and release the Green (AUD) button. The Power Button will blink twice to indicate it has changed the programming of the remote.
Note; If you wish to revert volume control back to your TV, repeat this
procedure and press the Red (TV) button instead of the
Green (AUD) button in step 3.
CM-7500TB1 CM-7500GB16 CM7500GB16 CM7500TB1 CM-7500 CM7500