Controlling The Volume For An Audio Device DVR+ New Remote CM-7500XRC2 (CM7500)

 Follow this procedure to program the Volume (+ and –) buttons

on the remote to control your audio device’s volume instead of

your TV’s volume.

Note : Before following this procedure, you must first program

your remote to control your audio devices Power On/Off, as described on the

previous pages in this section.

1  Press and hold the SETUP  button until the OFF/ON  button

blinks twice, then release the button.

2  Press and release the VOL+  button.

3  Press and release the Green (AUD)  button. The Power Button will blink twice to indicate it has changed the programming of the remote. 


Note; If you wish to revert volume control back to your TV, repeat this

procedure and press the Red (TV)  button instead of the

Green (AUD)  button in step 3.

CM-7500TB1 CM-7500GB16  CM7500GB16 CM7500TB1 CM-7500 CM7500   

Have more questions? Submit a request