Activating Channel Master TV using a PC

  1. Press the "Guide" button on your DVR+ Remote Control.
  2. Press the Red Colored button on the remote.
    1. This will bring you to the "Channel Master TV" white banner.
    2. Press the "OK" button on your remote.
  3. The "Activate the Channel Master TV" screen will pop up. (Below)
    1. Using the Navigation ring on your remote, highlight "Activate" and press "OK" button. (Below)
  4. The "Activate Channel Master TV" screen will appear. (Below)
    1. You now have 15 minutes to complete the process to activate your Channel Master TV channels.
      Note: If it takes more than 15 minutes to enter the Activation Code into the web page on your iPad, all you need to do is repeat these first 4 steps above.
  5. Open Chrome or Internet Explorer browser on your PC and enter www.channelmastertv.com in the address bar across the top of your browser screen.
    1. Note: Be certain that you enter channelmastertv.com and not just channelmaster.com.
    2. Note: The on-screen instruction may say "channelmastertv.com/link", but drop the "/link"
  6. You should now land on the Channel Master TV website. (Below)
    1. Select the Drop-Down Menu in the top left of your iPad screen. (Circled above)
  7. Select "Sign In/Sign Up" in the upper right corner of the page. (Below)
  8. The screen below will appear when you select "Sign In/Sign Up".
    1. Note: If you already have an account with Channel Master, it is not related to your new account with Channel Master TV. Do not fill in the "Sign In" fields.
    2. Complete this "Create your Free Channel Master TV Account" form (above), Select the "I Agree to the Terms of Use & Privacy Policy" after you read it.
  9. Input the Activation Code (From step 4) that was generated by the DVR+ in the last field. (Below)
  10. Then select "Sign Up".
    1. "Email verification Required" will appear. (Below)
  11. Now a Verification email will be sent to your email address that you'd entered in the form above.
  12. If you do not see the email in your inbox, check your "Junk" mail box.
    1. Select the "GO" button in the body of the email.
    2. This will send you to another webpage so you can create your new Channel Master TV password.
  13. Complete the form below with your choice of a Password.
  14. When you enter your matching passwords, select "Save", and you'll see the screen below.
  15. Now check your TV screen. You should see the "Channel Master TV Activated" window pop up. (Below)
    1. Press "OK" button on your remote, then press "Exit"
  16. Select "Guide" on your DVR+ remote, and go to channels above 100 or push the Red button on your remote. The image below shows the Internet Channels beginning on channel 201.
  17. Highlight any channel and press "OK" to begin watching a program.
Have more questions? Submit a request