The Aspect Ratio (AR) is fixed for HD content, (we assume a 16:9 HDTV) but variable for some SD content using the aspect ratio button. (Button on remote shows 2 boxes) The default is "Auto" which uses broadcast AFDs to determine the AR (4:3, Stretch, Zoom). By pressing the AR key on some SD content, you can toggle through the available options (4:3, Stretch, Zoom) to suit the TV. Once you have adjusted the AR for the selected channel it will stay in the adjusted setting until the channel is changed, the next time you go to the channel you will need to press the AR button again if you wish to re-adjust.
Note: The TV could also have it's own AR options so make sure these are not causing issues.
Note; If the SD content is being broadcast in 'Wide' format, the CM-7500 Aspect Ratio button, cannot function. If you wish to change the Aspect Ratio, you'll need to do that in the TV menu system/GUI.
CM-7500TB1 CM-7500GB16 CM7500GB16 CM7500TB1 CM-7500 CM7500