Software did not properly transfer to the CM-7000PAL DVR from the USB key
Make sure the most current software is loaded properly onto the USB key without interruption.
1. Do you have the most current software for the CM-7000PAL DVR on your USB key?
Please go to www.dtvpal.com to download the most current software
2. Unplug USB key from the USB port on the CM-7000PAL DVR. Power off the receiver and unplug the receiver from the electrical outlet. Wait 15 seconds, plug the receiver back into the electrical outlet and power the receiver on.
3. Re-insert the USB key into the USB port on the CM-7000PAL DVR.
Was the download successful?
You have completed troubleshooting.
4. If the problem persists please contact us or a local independent retailer for additional assistance.