Disconnected device or bad wall electrical outlet
1.Is the receiver plugged into an electrical outlet that is controlled by a wall switch?
2. If the outlet is controlled by a wall switch (not recommended), make sure that the switch is in the "On" position. See if there is another available outlet not control by a switch that the receiver can be plugged into.
Still not resolved
3. Unplug the CM-7000PAL from the AC electrical outlet, plug the CM-7000PAL back in and power it on.
4. Bypass any surge protector and plug directly into a known working outlet (this may require an extension cord). If the receiver powers on at the new outlet the customer may need an electrician.
5. If the problem persists please contact us or a local independent retailer for additional assistance.