Rebooting, or message stating that their CM-7000PAL DVR is overheating.

Symptom
Rebooting, or message stating that their CM-7000PAL DVR is overheating.

Cause
This message appears when the CM-7000PAL DVR's temperature is too high for it to operate properly.

Prevention
This can be prevented by keeping the CM-7000PAL DVR in an open area with adequate airflow to avoid overheating.

Troubleshooting

1. Verify the CM-7000PAL DVR is in an open area to receive good airflow for cooling.

2. If the CM-7000PAL DVR is in an enclosed space, the CM-7000PAL DVR must be moved to prevent damage from overheating.

3. Unplug the CM-7000PAL DVR from the AC electrical outlet, plug the CM-7000PAL DVR back in and power it on.

4. If the problem persists please contact us or a local independent retailer for additional assistance.

Have more questions? Submit a request