Why Does the DVR+(CM-7500) scan 100.1, 100.2, 100.x channels.

 

In the event that a channel is scanned that does not have the correct mapping information in the stream from the broadcaster, the DVR+(CM-7500) will automatically place these channels on 100.1 and above in the order in which they were scanned.  Many times the mapping information could be unavailable because of low signal or conflict with another channel.  If you believe this to be the case, please try to improve your signal strength and rescan the channels.  Once the DVR+(CM-7500) receives all of the mapping information it will insert the channel on the appropriate channel.

Have more questions? Submit a request